Technical Data of SOLAS

SOLAS standard version
Analysis Frequency depending on the application 20–60 analyses p. h.
Analytical performance
(elements analysed and
analysis parameters gained
basically all chemical elements, including aluminium and uranium.
in coal / lignite:

sulphur and ash contents, components of the ash, calorific value, slagging factors, chemical elements
(Al, Si, P, S, Cl, K, Ca, Ti, Cr, Mn, Fe)

in iron ore: chemical elements
(Al, Si, P, Cl, K, Ca, Ti, Cr, Mn, Fe)
in cement: components of cement raw meal
(Al, Si, S, Cl, K, Ca, Ti, Cr, Mn, Fe)
calculation of the LSF
(container version)
7 t
(container version)
L 5500 x  W 3000 x  H 2600 mm, or a 20 ft. “cargo container”
Power supply 25 kW: 400, 500 or 690 V (voltage & frequency according to local conditions - please specify)
Operating temperature range -40 – + 45° C (air-conditioning & heating integrated in the container)
Mechanical installation/vibration the container rests on air springs
Communication between SOLAS and remote visualisation station all Ethernet connections (e.g. DSL modems, wireless, optical fibre, GSM router VPN), with the distance depending on the chosen type of connection:
DSL modems up to ~10 km, wireless up to ~1 km, GSM router virtually unlimited
Interfaces/control contacts OPC, Profibus, serial interface, hardware: 4-20 mA / floating contacts



The following graph shows examples of the results about the ash content in lignite, achieved by SOLAS during the calibration.

coal analysis